• #14楼 @pengedy 谢谢您,我去研究一下

  • 我遇到了 但是我的是在PD里,鼠标非常奇怪,但是触摸板正常

  • #3楼 @huaz 已发送

  • #1楼 @huaz 留下你的邮箱~

  • 我就想知道,为什么我刚离开成都 就开了

  • #11楼 @rina 谢谢你,祝你早日找到一份理想的工作😊

  • #6楼 @zj0713001 恩,对,我越来越意识到这个方案的困难了,现在考虑用Vue+JAVA来分离前后端,Rails这边可能需要看的东西太多了。

  • #3楼 @hxh1246996371 大致明白了,那如果使用Rails来后端的话,这个Api这些怎么来提供呢?感觉和普通开发有很大不同( ・᷄ ᵌ・᷅ )

  • #1楼 @realwol 抱歉,已经重新编辑。
    1.那如果使用Rails5的API mode有没有什么教程可以研读一下,和普通ROR开发有什么区别呢?
    2.您的意思是前端angular后端Rails,通过ES来交互是吗?
    3.能否使用bootstrap这样的框架呢?感觉angular的学习路线有点太陡了

  • #5楼 @blacktulip

    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 ::1 prefixlen 128 
        inet 127.0.0.1 netmask 0xff000000 
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 
        nd6 options=1<PERFORMNUD>
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0<> mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        options=10b<RXCSUM,TXCSUM,VLAN_HWTAGGING,AV>
        ether **
        nd6 options=1<PERFORMNUD>
        media: autoselect (none)
        status: inactive
    en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500
        options=60<TSO4,TSO6>
        ether **
        media: autoselect <full-duplex>
        status: inactive
    fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 4078
        ladder **
        media: autoselect <full-duplex>
        status: inactive
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ether **
        inet6 fe80::8a1f:a1ff:fe26:ff58%en1 prefixlen 64 scopeid 0x7 
        inet 192.168.31.93 netmask 0xffffff00 broadcast 192.168.31.255
        nd6 options=1<PERFORMNUD>
        media: autoselect
        status: active
    p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304
        ether **
        media: autoselect
        status: inactive
    bridge0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500
        options=63<RXCSUM,TXCSUM,TSO4,TSO6>
        ether **
        Configuration:
            id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
            maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
            root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
            ipfilter disabled flags 0x2
        member: en2 flags=3<LEARNING,DISCOVER>
                ifmaxaddr 0 port 5 priority 0 path cost 0
        media: <unknown type>
        status: inactive
    utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380
        inet6 fe80::2002:1911:69d:5900%utun0 prefixlen 64 scopeid 0xa 
        inet6 fdad:b058:b5ee:81b5:2002:1911:69d:5900 prefixlen 64 
        nd6 options=1<PERFORMNUD>
    

    MAC地址我已经处理了